Service Schedule - Husqvarna FE 450 EU Owner's Manual

Table of Contents

Advertisement

10

SERVICE SCHEDULE

10.1
Service schedule
Read out the fault memory using the Husqvarna diagnostics tool.
Check that the electrical equipment is functioning properly.
Check and charge the battery.
Check the front brake linings. (
Check the rear brake linings. (
Check the brake discs. (
Check the brake lines for damage and leakage.
Check the rear brake fluid level. (
Check the free travel of the foot brake lever. (
Check the frame and swingarm.
Check the swingarm bearing.
Check the heim joints at the top of the shock absorber.
Check the tire condition. (
Check the tire air pressure. (
Check the wheel bearing for play.
Check the wheel hubs.
x
Check the rim run-out.
x
Check the spoke tension. (
Check the chain, rear sprocket, engine sprocket and chain guide. (
Check the chain tension. (
Grease all moving parts (e.g., side stand, hand lever, chain, ...) and check for smooth operation.
Check/rectify the fluid level of the hydraulic clutch. (
Check the front brake fluid level. (
Check the free travel of the hand brake lever. (
Check the steering head bearing play. (
Check the valve clearance.
Check the clutch.
x
Change the engine oil and oil filter and clean the oil screens.
Check all hoses (e. g., fuel, cooling, bleeding, drainage) and sleeves for cracking, leaks, and incorrect routing.
Check the antifreeze and coolant level. (
Check the cables for damage and routing without sharp bends.
Check that the cables are undamaged, routed without sharp bends and set correctly.
Clean the air filter and air filter box.
Change the glass fiber yarn filling of the main silencer.
Check the screws and nuts for tightness.
Check the headlight setting. (
Change the fuel screen.
x
Check the fuel pressure.
x
Adjust the idle speed.
(
x
Check that the radiator fan is functioning properly.
Final check: Check the vehicle for roadworthiness and take a test ride.
Read out the fault memory using the Husqvarna diagnostics tool after a test ride.
Make the service entry in Husqvarna Dealer.net and in the service booklet.
One-time interval
Periodic interval
x
p. 67)
p. 71)
p. 66)
p. 70)
p. 69)
x
x
p. 76)
p. 77)
x
p. 77)
p. 59)
p. 63)
p. 66)
p. 65)
p. 46)
x
p. 86)
x
x
x
p. 84)
(
p. 91)
p. 90)
x
x
x
p. 60)
(
p. 92)
x
x
(
p. 54)
x
x
Every 30 operating hours/after every race
Every 15 operating hours
Once after 1 operating hour
x
x
32

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fe 450 usaFe 501 ausFe 501 euFe 501 usa

Table of Contents