Safety Advice; Use Definition - Intended Use; Degrees Of Risk And Symbols; Tampering Warning - Husqvarna FE 450 EU Owner's Manual

2

SAFETY ADVICE

2.1

Use definition - intended use

(FE EU, FE AUS)
Husqvarna sport motorcycles are designed and built to withstand the normal stresses and strains of competitive use. The motorcy-
cles comply with currently valid regulations and categories of the top international motorsport organizations.
Info
The vehicle should only be used by trained persons. The motorcycle is authorized for public road traffic in the homologous
(reduced) version only.
In the derestricted version, the motorcycle must be used only on closed off properties remote from public road traffic.
This motorcycle is designed for use in offroad endurance competition and not primarily for use in motocross.
(FE 501 USA)
Husqvarna sport motorcycles are designed and built to withstand the normal stresses and strains of competitive use. The motorcy-
cles comply with currently valid regulations and categories of the top international motorsport organizations.
Info
The motorcycle may only be used in closed off areas remote from public road traffic.
This motorcycle is designed for use in offroad endurance competition and not primarily for use in motocross.
2.2 Safety advice
A number of safety instructions need to be followed to operate the vehicle safely. Therefore, read this manual carefully. The safety
instructions are highlighted in the text and are referred to at the relevant passages.
Info
The vehicle has various information and warning labels at prominent locations. Do not remove information/warning labels. If they
are missing, you or others may not recognize dangers and may therefore be injured.
2.3

Degrees of risk and symbols

Danger
Identifies a danger that will immediately and invariably lead to fatal or serious permanent injury if the appropriate measures are not
taken.
Warning
Identifies a danger that is likely to lead to fatal or serious injury if the appropriate measures are not taken.
Caution
Identifies a danger that may lead to minor injuries if the appropriate measures are not taken.
Note
Identifies a danger that will lead to considerable machine and material damage if the appropriate measures are not taken.
Warning
Identifies a danger that will lead to environmental damage if the appropriate measures are not taken.
2.4

Tampering warning

Tampering with the noise control system is prohibited. Federal law prohibits the following acts or the causing thereof:
1 The removal or rendering inoperative by any person other than for purposes of maintenance, repair, or replacement, of any device or
element of design incorporated into any new vehicle for the purpose of noise control prior to its sale or delivery to the ultimate pur-
chaser or while it is in use, or
2 the use of the vehicle after such device or element of design has been removed or rendered inoperative by any person.
Among those acts presumed to constitute tampering are the acts listed below:
6