Motion Setup - Balter BTZ-2700 Instruction Manual

Motion Setup

MOTION SETUP
------------------------
MOTION LOCK
PWR UP ACTION
AUTO FLIP
JOG MAX SPEED
JOG DIRECTION
FRZ IN PRESET
<PARKING ACTION SETUP>
<ALARM INPUT SETUP>
BACK
EXIT
Speed Dome Camera Instruction Manual
Sets the general functions of Pan/Tilt motions.
Motion
OFF
Lock
ON
ON
120/SEC
INVERSE
OFF
Power Up
Action
Auto Flip
Jog Max
Speed
Jog
Direction
Freeze
in Preset
[ON/OFF]
If Motion Lock is set to ON, it is impossible to
set up and delete Preset, Swing, Pattern and
Group. It is possible only to run those
functions. To set up and delete those functions,
enter into OSD menu.
[ON/OFF]
Refer to "Other Functions" section.
[ON/OFF]
Refer to "Other Functions" section.
[1°/sec ~360°/sec]
Sets the maximum jog speed. Jog speed is
inversely proportional
magnifications. As the zoom magnification
goes up, the pan/tilt speed goes down.
[INVERSE/NORMAL]
Sets the Jog Direction. If this is set to
'Inverse', the view direction in the screen is
same as the direction of joystick. If this is set
to 'Normal', the view direction in the
screen is the reverse dirction of joystick.
[ON/OFF]
Sets Frame Freeze Function. This feature
freezes the scene on the monitor when going
to a preset. At the start point of a preset
movement, a camera starts freezing the image
of the start point. Camera keeps displaying
the image of the start point during preset
movement and does not display the images
which camera gets during preset movement.
As soon as camera stops at preset end point,
camera starts displaying live images which it
gets at the end preset point. This feature also
reduces bandwidth when working with digital
systems or digital network systems.
This function availability should be different
by models.
4
OSD MENU
to the zoom
36/53