Table of Contents
Advertisement
Quick Programming Guide
The menu items with < > always have sub-menus.
To go to submenus or make the cursor move to the right, press NEAR key.
To go to the previous-upper level menus, press FAR key.
To make a selection, press NEAR key
To cancel a selection, press FAR key
To move the cursor in the menu, use the joystick to the Up/Down direction or Left/Right
direction.
To change a value of an item, use Up/Down of the joystick in the controller.
To save changes, press NEAR key.
To cancel changes, press FAR key.
Main Menu
SPEED DOME CAMERA
------------------------
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME CAMERA SETUP>
<SYSTEM INITIALIZE>
EXIT
Speed Dome Camera Instruction Manual
System
Displays the system information and
configuration. The system setting can
Information
not be changed using the OSD menu
and the information is for reference
only.
Display Setup
Enables the user to program how labels
are displayed on the monitor.
Dome Camera
Enables the user to configure various
functions of the camera.
Setup
System Initialize
Initializes all system configurations and
all
parameters.
OSD MENU
data
to
the
factory
4
default
27/53
Advertisement
Table of Contents
