Preset Setup - Balter BTZ-2700 Instruction Manual

Preset Setup

PRESET SETUP
------------------------
PRESET NO.
CLR PRESET
<EDIT SCENE>
<EDIT LABEL>
RELAY OUT
CAM ADJUST
BACK
EXIT
Speed Dome Camera Instruction Manual
Preset
Number
1
CANCEL
LABEL123
OFF
GLOBAL
Clear
Preset
Edit
Preset Scene
Edit
Preset Label
Relay Out
CAM Adjust
[1~128]
Selects a preset number to set up. If a
selected preset is already defined, the
camera moves to the pre-defined position
and preset parameters such as Label and
CAM Adjust show on the monitor. If a
selected preset
"UNDEFINED" shows on the monitor.
[CANCEL/OK]
Deletes the data of the selected Preset.
Re-defines the scene position of the
selected Preset.
Edits the label of the selected Preset to
show on the monitor when the preset runs.
MAX. 10 alphanuberic characteristics are
allowed.
Defines the relay output.
[GLOBAL/LOCAL]
WB(White Balance)
Exposure) can be set up independently for
each preset. There are 2 modes, "Global"
mode & "Local" mode. The Global mode is
that WB and/or AE are/is set up totally and
simultaneously for all presets. The Global
parameter setup such as WB and AE can
be done in "ZOOM CAMERA SETUP" menu.
The Local mode is that WB and/or AE
are/is set up independently or separately
for each preset. The Local parameter setup
for WB and AE can be done in each preset
setup menu. Each Local parameter such as
WB and AE activates correspondingly
when the camera arrives at each preset
position. During jog operation, Global
WB/AE value should be applied. All Local
WB/AE values do not change although
Global WB/AE value changes. The Local
mode has the prior to the Global mode.
4
OSD MENU
is not defined,
and AE(Auto
39/53