Balter BTZ-2700 Instruction Manual page 33

Auto Exposure Setup
AE SETUP - GLOBAL
------------------------
BACKLIGHT
DAY/NIGHT
BRIGHTNESS
IRIS
SHUTTER
AGC
SSNR
SENS-UP
BACK
EXIT
Speed Dome Camera Instruction Manual
Backlight
OFF
AUTO
50
AUTO
ESC
MIDDLE
MIDDLE
<AUTO>
Day/Night
Brightness
IRIS
[OFF/WDR/BLC/HLC] or [OFF/BLC/HLC]
Sets Backlight Compensation. If a bright
backlight is present, the subjects in the
picture may appear dark or as a
silhouette. Backlight
enhances objects in the center of the
picture. The camera uses the center of the
picture to adjust the iris. If there is a
bright light source outside of this area, it
will wash out to white. The camera will
adjust the iris so that the object in the
sensitive area is properly exposed.
Some modles has WDR(Wide Dynamic
Range) function, which are better function
than BLC. HLC(High Light Compensation)
function removes the high light in a
limited environment such as parking
garage.
[AUTO/DAY/NIGHT]
Sets Day&Night mode.
[0~100]
Adjusts the brightness of the images. Iris,
The Shutter Speed and Gain are adjusted
automatically in correspondence with
each numeric value.
[AUTO/MANUAL(F1.6~F28)]
Sets Iris to operate automatically or at a
user-defined level. If Iris is set to Auto,
Iris has higher priority in adjusting AE
and Shutter Speed is fixed. Auto iris is the
lens function that automatically opens
closes the iris in response to changing
light conditions.
If Iris is set to Manual, Iris is fixed and Iris
has lower priority in adjusting AE, in
comparison with others.
4
OSD MENU
compensation
33/53