Alcatel-Lucent OmniPCX Office Installation Manual page 98

Chapter
4
The 4135 IP Conference Phone is a SIP device which has no handset; it is dedicated to be
used as central for conferences.
Conferences are not managed by the system, but by the device itself. Up to four 4135 IP
Conference Phones can be connected to the Alcatel-Lucent OmniPCX Office Communication
Server.
4.4.3.1.2 Commissioning the set
This section describes how to commission the set in the two available commissioning types:
- Static: commissioning is manual on the set and on OMC
- Dynamic (DHCP): the set automatically retrieves its IP address and other parameters from
a DHCP server. Complementary operations are necessary on the set and on OMC
For static commissioning, operations are:
1. Configure the user in OMC, refer to
2. Connect the set to the LAN, refer to
3. Configure the network parameters on the set, refer to
static initialization
4. Export the server certificate from the Alcatel-Lucent OmniPCX Office Communication
Server: refer to
Communication Server
5. Upload the certificate on the 4135 IP Conference Phone
For dynamic commissioning, operations are:
4-50
Figure 4.43: 4135 IP Conference Phone set connectors
Configuring the user by OMC
Connecting the set to the LAN
Exporting the server certificate from the Alcatel-Lucent OmniPCX Office
Configuring network parameters for