Alcatel-Lucent OmniPCX Office Installation Manual page 84

Chapter
4
The default initialization is dynamic.
To select the initialization type, refer to the following table.
If
You have a DHCP
server
You do not have a
DHCP server
Configuring the DHCP server for dynamic initialization
Two types of dynamic initialization are available:
- Dynamic (default value): the set selects in priority DHCP offers, with a Vendor Specific
option corresponding to an Alcatel-Lucent server.
- Dynamic Alcatel: the set accepts only DHCP offers with a Vendor Specific option
corresponding
alcatel.a4400.0, alcatel.a4200.0).
When initializing in dynamic mode, the set provides the following information in the DHCP
Discover message
- Option 60: (vendor class identifier): alcatel.ictouch.0
- Option 55: list of requested options: subnet mask, router option, broadcast address, option
43 vendor specific info, server ID, renewal time, rebinding time and vendor class ID
Option 43 is vendor specific information, meaning that this option is defined for a specific client
vendor ID. In the DHCP offer, the data within Option 43 corresponds to the client vendor ID
specified in the request.
In the case of 8002/8012 Deskphone sets, suboption 67 of option 43 provides the path of
configuration files on the Alcatel-Lucent OmniPCX Office Communication Server.
The DHCP offer provides the following parameters:
4-36
table 4.16: Initialization type selection
Then the required
initialization type is
Dynamic or Proprietary
dynamic
Static
to an Alcatel-Lucent
Further information
- Refer to Configuring the DHCP server
for dynamic initialization
- In case of Proprietary dynamic
selection, the IP address of the set must
be provided by the Proprietary router.
- Refer to Commissioning the Set in Static
Mode
- Obtain from your network administrator:
• An IP address for the 8002/8012
Deskphone set
• The subnetwork mask
• The router address
• The DNS addresses (primary and
secondary)
• The VLAN ID (if VLAN is used)
• The URL of the Alcatel-Lucent
OmniPCX Office Communication
Server for set configuration file
download
Note:
You need to know the set directory number.
Enterprise server (alcatel.int-ip.0,