Alcatel-Lucent OmniPCX Office Installation Manual page 85

Communication server
Hide thumbs Also See for OmniPCX Office:
Table of Contents

Advertisement

-
IP address
-
Router IP address
-
Subnet mask
-
Option 66: IP address or name of the Alcatel-Lucent OmniPCX Office Communication
Server:10443, for example 192.168.12.34:10443
-
Suboption 67 of option 43: the value of this sub-option corresponds to the DM Url.It must
contain a string value set to /dmcfg/
-
Option 58: VLAN ID: this is sent as a suboption of option 43
Optionally, the DHCP offer can include the following parameters, which can also be configured
locally on the terminal or on the Alcatel-Lucent OmniPCX Office Communication Server:
-
Option 6: Domain Name Server (DNS primary and secondary)
-
Option 15: Domain name
-
Option 12: Host name (eg, ICTouch<MAC>)
-
Option 42: SNTP server
-
Option 120: SIP server (outbound proxy server address or name)
Commissioning the Set in Static Mode
Selecting the Set Initialization Mode (Static)
By default, a set is configured to initialize in dynamic mode.
To modify the initialization mode:
1. Open the set administration menu (see:
2. From the set administration menu, scroll up/down to display IP parameters and press OK
3. Scroll up/down to display IP mode: xxxx
The available initialization modes are: Dynamic (default option), Alcatel Dyn or Static
If the desired mode is displayed, you can skip IP mode selection
4. If Dynamic is displayed, press successively OK to change the initialization mode in Static
5. Scroll up/down to display Save and press OK
Configuring the Set IP Parameters
1. Open the set administration menu (see:
2. From the set administration menu, scroll up/down to display IP Parameters and press OK.
3. Scroll up/down to display and modify set IP parameters:
IP @: Set IP address
Subnet: IP subnetwork mask
Router: Router IP address
4. After the Router parameter, scroll up/down to display Save and press OK
Configuring the binary and configuration file download parameters
1. Open the set administration menu (see:
Accessing the set administration menu
Accessing the set administration menu
Accessing the set administration menu
)
)
)
4-37

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents