Call Handling Features; Networking - Alcatel-Lucent OmniPCX Office Installation Manual

registration is accepted but the set is put "Out of service".
Licensing will accept 5 more sets than the limit, but only if the service is opened (if the limit is
different than 0). This margin is only applied if the system is not in PPU mode.
3.4.5.3 Number of IP-DECT sets
The number of devices is limited to the License allowance.
In the OMC, the creation of a new IP-DECT subscriber is refused if the number of existing
IP-DECT subscribers has reached the maximum value indicated in the current license.
3.4.6

Call handling features

3.4.6.1 ARS
The same as for Alcatel-Lucent OmniPCX Office Communication Server.
3.4.6.2 DISA / DISA Transit
The same as for Alcatel-Lucent OmniPCX Office Communication Server.
3.4.6.3 ISVPN ISDNs
The same as for Alcatel-Lucent OmniPCX Office Communication Server.
3.4.6.4 QSIG + (Inter PABX link)
The same as for Alcatel-Lucent OmniPCX Office Communication Server.
3.4.6.5 Number of Meet-me conferences
With this license, the conference master is able to activate a Meet-me conference. Up to now,
the number of Meet-me conferences is limited to one.
3.4.6.6 Enhanced Automated Attendant
It defines the license type chosen for Enhanced Automated Attendant: (No license, 1 tree
license or 5 trees license)
3.4.7

Networking

3.4.7.1 Number of B channels
The T2, DTL2 and PCM boards are the same. A strap defines the type of board . So all boards
are treated with the same pricing.
The number of DTL b channels is counted. In case of an upgrade, a reset is necessary to take
the new channels into account.
3.4.7.2 B channels on MIX boards
The number of b channels on MIX boards are counted to accept MIX boards in the limit
allowed bythe license. This means that when a MIX board appears and all b channels allowed
by license are used, the MIX board is refused.
When the license is set to 0, only 0/4/4 MIX board are accepted.
3-11