Aastra DT412 User Manual page 103

â
or
Select
BusinessPhone – Cordless DT412/DT422/DT432
Change system
When you have registered to more than one system, you can
manually select which system to connect to. You can connect to
up to four different PBX systems with your Cordless, normally
named A, B, C and D.
á
When you have entered settings:
á
Select
System
ã
Select
Select system
Select the required system.
Note: The normal setting is Auto. This setting makes the
Cordless automatically look and connect to a system.
Press (see display).
System selected
System information
The
Information
Cordless and your network connection.
á
When you have entered settings:
ã
Select
System
á
Select
Information
Press.
You can view the following information:
IPEI
IPDI
SW
version
AP SW
version
Note: You cannot alter these settings.
.
.
is shown.
menu shows general information about your
.
.
The unique global GAP registration number for
the Cordless.
The unique global GAP registration number for
the SIM card.
Here you can see which version of the Cordless
software you have.
The alarm module software. If the alarm module
is not connected, it will be indicated with
(Not Connected).
Settings
NC
103