Connecting The Hp Touch Mat - HP Sprout User Manual

Component
(9)

Connecting the HP Touch Mat

Set up your Sprout on a flat, level surface.
CAUTION:
●
Do not cut or pierce the touch mat.
●
Do not bend or fold the touch mat.
● Do not place any magnetic components on the touch mat.
● Do not use metal objects on or under the touch mat.
● When using a stylus on the touch mat, do not place your hand or palm on the touch mat because your
hand or palm may be treated as contact points on the touch mat.
To connect the touch mat, place the touch mat on a flat, level surface in front of the monitor, and slide it
toward the front of the monitor. The magnets in the Sprout Connector connect the touch mat to the monitor
automatically.
NOTE: If you remove the touch mat, the projector will turn off.
To protect the touch mat from dirt or accidental damage when it is not being used, use the optional HP Touch
Mat cover (purchased separately).
8 Chapter 1 Getting to know your Sprout
Internal microphones (2)
To prevent damage to the touch mat:
Description
NOTE: When a device is connected to the jack, the computer
speakers are disabled.
Record audio, automatically filtering out the noise around you.