Page 1
DC-EX 125/5 M Bedienungsanleitung Operating instructions Mode d’emploi Manual de instrucciones Istruzioni d’uso Gebruiksaanwijzing Brugsanvisning Bruksanvisning Bruksanvisning Käyttöohje Manual de instruções Οδηγιες χρησεως Használati utasítás Návod k obsluze Návod na obsluhu Instrukcja obsługi Upute za uporabu Navodila za uporabo Ръководство за обслужване Инструкция...
ORIGINAL OPERATING INSTRUCTIONS DC-EX125 / 5" M cutting and slitting hood Operating controls and components 1 It is essential that the operating instructions are read before the tool is operated for the Connector first time. Locking catch Always keep these operating instructions to- Front clip Contact plate with cutting line indicator gether with the tool.
2.1 Use of the product as directed The DC‑EX 125/ 5" M slitting hood is used in conjunction with 125 mm/ 5" discs and a Hilti vacuum cleaner for cutting and slitting mineral materials, especially masonry. The DC‑EX 125/ 5" M slitting hood is to be used exclusively with the DCG 125‑S (DCG 500‑S) and DEG 125‑D/P (DEG 500) for dry cutting (use of water is not permissible).
Slitting width with twin discs 25 mm (1") Maximum cutting depth 28 mm (1¹/₈ in) Connector For Hilti and other standard vacuum cleaners Cutting position mark Discs on inside of line and maximum slitting width Wheels 2 wheels and carriage for easy advance...
Page 8
are connected and properly used. Use of dust d) The rated speed of the diamond wheel must be collection can reduce dust-related hazards. at least equal to the maximum speed marked on the power tool. Diamond wheels running faster than 5.1.4 Power tool use and care their rated speed can break and fly apart.
c) Do not position your body in line with and behind diamond wheel may grab the surface and pull the power tool out of your control. the rotating diamond wheel. Kickback will propel o) Do not run the power tool while carrying it at your the tool in direction opposite to the wheel’s move- side.
6.4 Fitting the two diamond cutting discs for 6.5 Depth adjustment 7 slitting work 5 Press the depth adjustment locking lever. CAUTION Set the desired cutting depth according to the scale Use of Kwik-Lock nuts for this application is not by pressing the depth adjustment catch.
9 Disposal Most of the materials from which Hilti tools or appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking back old tools and appliances for recycling. Ask Hilti customer service or your Hilti representative for further information.