SETTING THE DRIVE RECORDER
CAMERA SETTINGS
Select the
relevant check
boxes for the
cameras you
want to record
(including Audio)
Normal Mode
Event Mode
Motion Sensitivity
Select the relevant check boxes for the
cameras you want to record for motion
detection. To use motion detection as an
Event recording select the recording mode
as Event Mode and then the select the
corresponding check box for motion
Continuous recording will automatically start after
booting the SVC400GPS.
Recording by G-Sensor, Alarm1~3 or [RECORD] button.
Select Motion Detection Sensitivity from 1 to 5.
(5 is the setting for the highest sensitivity and 1 is the lowest
sensitivity)
Select level of
Motion Sensitivity
32