Fig. 49 Temperature indicator
Fig. 50 Error indicator
Fig. 51 Locked condition indicator (only with remote control)
Fig. 52 Flame indicator
Fig. 53 Solar mode indicator (see chapter 6.4, page 33)
Fig. 54 Remote control indicator
C 1210 ES/ESC
For your safety read before operating your water
▶ If you do not follow these instructions exactly, a fire or
explosion may result causing property damage,
personal injury or loss of life.
A. This appliance is equipped with electronic ignition for lighting the
main burner. When turning the heater on, follow these instructions
WHAT TO DO IF YOU SMELL GAS
▶ Do not try to light any appliance.
▶ Do not touch any electric switch; do not use any phone in your
▶ Immediately call your gas supplier from a neighbors phone. Follow the
gas supplier's instructions.
▶ If you cannot reach your gas supplier, call the fire department.
B. Use only your hand to press the on/off control switch. Never use tools.
Follow these instructions exactly. If control switch is jammed, close the
gas supply and call a qualified service technician. Attempted forceful
repair may result in a fire or explosion.
C. Do not use this appliance if any part has been under water.
Immediately call a qualified service technician to inspect the appliance
and to replace any part of the control system and any gas control which
has been under water.
▶ To start the appliance press the On/Off button.
▶ To shut down the appliance press the On/Off button again.
To select hot water temperature:
▶ Press buttons
in order to reach desired temperature.
Operation instructions | 33
6 720 644 887 (2013/02)