Safety Locks - VESPA LX 4T USA Workshop Manual

Pre-delivery
Aesthetic inspection
- Paintwork
- Joins between plastic fairings
- Damage
- Cleanness
Tightening torques inspection
Fastenings check
- All tightening torques
- External fairing screws
Handlebar tightening
Lower steering ring nut
Upper steering ring nut
Front wheel axle nut
Rear wheel nut
Rear shock absorber-engine nut
Shock absorber - chassis nut
Engine-swinging arm bolt
Floating arm-frame pin
Electrical system
- Check that voltage is at least 12.6V; if not, recharge the battery according to directions.
Check the following devices:
- Keyswitch
- Headlight full/dipped beam, panel indicator lights, side lights
- Headlight adjustment
- Taillight
- Brake light (front and rear brake)
- Turn signals and relative indicators
- Speedometer and instrument panel lighting
- Horn
- Start button
CAUTION
TO ENSURE BEST PERFORMANCE, BATTERY MUST BE CHARGED BEFORE USE ONLY IF
VOLTAGE IS BELOW 12,7V. FAILURE TO RECHARGE THE BATTERY BEFORE ITS FIRST USE
MAY SHORTEN THE BATTERY'S LIFE.
WHEN INSTALLING THE BATTERY ON THE VEHICLE CONNECT THE POSITIVE LEAD BEFORE
THE NEGATIVE LEAD.
NEVER USE A FUSE WITH A HIGHER RATING THAN THE PRESCRIBED VALUE. THE USE OF
UNSUITABLY RATED FUSES CAN RESULT IN WIDESPREAD DAMAGE TO THE VEHICLE, IN-
CLUDING FIRE.
PRE DE - 152

SAFETY LOCKS

Name
LX 4T USA
Torque in Nm
40 ÷ 50
8 ÷ 10
30 ÷ 40
75 ÷ 90
137 ÷ 152
33 ÷ 41
20 ÷ 25
33 ÷ 41
44 ÷ 52