Removing The Screen Protector; Replacing The Main Battery - Motorola FR68 Series User Manual

Removing the Screen Protector

A screen protector is applied to the FR68 Series. Zebra recommends using this to minimize wear and
tear. Screen protectors enhance the usability and durability of touch screen displays.
To remove the screen protector, lift the corner using a thin plastic card, such as a credit card, then
carefully lift it off the display.
Removing the Screen Protector
Figure 1-6
CAUTION

NOTE Not using a screen protector can affect warranty coverage. To purchase replacement protectors,
contact your local account manager or Zebra. These include screen protector installation
instructions. Part number:

Replacing the Main Battery

Push outward the battery door latches to unlock the door.
1.
Please wait for 5 seconds after the display is off.
2.
Lift the top of the battery door and remove.
3.
Press the battery release latch on the top of the battery to unlock, and lift the battery out of the
4.
well.
Insert the replacement battery, bottom first, into the battery compartment in the back of the FR68
5.
Series.
Press the battery down into the battery compartment.
6.

Position the battery correctly, with the battery charging contacts on top of the charging contacts in
NOTE
the battery compartment.
Push inward the latches to lock the door when the door is installed properly.
7.
The FR68 Series powers up after the battery is inserted and the battery door is replaced.
Do not use a sharp object to remove the protector. Doing so can damage the display.
MN2800AAAPSC
.
22
Getting Started