Materials Required; Cleaning The Fr68 Series; Housing; Display - Motorola FR68 Series User Manual

!
Avoid exposing this product to contact with hot oil or other flammable liquids. If such
WARNING
exposure occurs, unplug the device and clean the product immediately in accordance with
these guidelines.

Materials Required


Alcohol wipes

Lens tissue

Cotton tipped applicators

Isopropyl alcohol

Can of compressed air with a tube.

Cleaning the FR68 Series

Housing

Using the alcohol wipes, wipe the housing including keys and in-between keys.

Display

The display can be wiped down with the alcohol wipes, but care should be taken not to allow any
pooling of liquid around the edges of the display. Immediately dry the display with a soft, non-abrasive
cloth to prevent streaking.

Scanner Exit Window

Wipe the scanner exit window periodically with a lens tissue or other material suitable for cleaning
optical material such as eyeglasses.

Connector

Remove the main battery from mobile computer. See
1.
Close the battery cover.
2.
Dip the cotton portion of the cotton tipped applicator in isopropyl alcohol.
3.
Rub the cotton portion of the cotton tipped applicator back-and-forth across the connector on the
4.
bottom of the FR68 Series. Do not leave any cotton residue on the connector.
Repeat at least three times.
5.
Use the cotton tipped applicator dipped in alcohol to remove any grease and dirt near the
6.
connector area.
Use a dry cotton tipped applicator and repeat steps 4 through 6.
7.
Spray compressed air on the connector area by pointing the tube/nozzle about ½ inch away
8.
from the surface.
CAUTION
Do not point nozzle at yourself and others, ensure the nozzle or tube is away
from your face.
Maintenance & Troubleshooting
Replacing the Main Battery on Page
121
22.