Single Slot Usb/Serial Cradle - Motorola FR68 Series User Manual

Hide thumbs Also See for FR68 Series:
Table of Contents

Advertisement

Single Slot USB/Serial Cradle

Troubleshooting the Single Slot USB/Serial Cradle
Table 9-3
Symptom
LEDs do not
light when FR68
Series or spare
battery is
inserted.
FR68 Series
battery is not
charging.
Possible Cause
Cradle is not
Ensure the power cable is connected securely to both the
receiving power.
cradle and to AC power.
FR68 Series is not
Remove and re-insert the FR68 Series into the cradle,
seated firmly in the
ensuring it is firmly seated.
cradle.
Spare battery is not
Remove and re-insert the spare battery into the charging
seated firmly in the
slot, ensuring it is firmly seated.
cradle.
FR68 Series i s
Ensure cradle is receiving power. Ensure FR68 Series is
removed from
seated correctly. Confirm main battery is charging under
cradle or cradle
Settings
is unplugged from
in approximately six hours.
AC power too soon.
Battery is faulty.
Verify that other batteries charge properly. If so, replace the
faulty battery.
The FR68 Series
Remove and re-insert the FR68 Series into the cradle,
is not fully seated
ensuring it is firmly seated.
in the cradle.
Ambient
Move the cradle to an area where the ambient
temperature of the
temperature is between 0°C (32°F) and 35°C (95°F).
cradle is too warm.
Battery does not charge if ambient temperature is below 0°C
Extreme battery
(32°F) or above 45°C (113°F).
temperature.
126
Maintenance & Troubleshooting
Action
>
>
. The 3600 mAh battery i s fully charged
System
Power
>
Start

Advertisement

Table of Contents
loading

Table of Contents