Security - Motorola FR68 Series User Manual

Select a ring tone for incoming calls from the
3.
the selected ring tone, tap

To use custom .wav, .mid, or .wma files as ring tones, use ActiveSync on the host computer to
copy the file to the /Windows/Rings folder on the FR6874/FR6876. Then select the sound from
the ring tone list
Select a keypad tone from the
4.
that sounds when entering a phone number on the keypad.
Select
Short tones
number on the keypad.
Select to disable tones.
Off

Turning off sounds saves power and prolongs battery life

Security


Place emergency calls at any time, without requiring a PIN or a SIM card
To require a PIN when using the phone:
From the
1. Phone
.
Security
Enter PIN
Use the touch keypad to enter a four to eight digit PIN.
2.
Tap to enable the PIN and return to the
3. Enter
CAUTION If you enter an incorrect PIN, the message "SIM PIN incorrect: Try again" appears. After
three consecutive incorrect attempts, the SIM card is blocked. The phone does not allow
you to attempt to enter your PIN again and you must obtain a PIN Unblock Key from your
service provider.
From the
1. Phone
Use the touch keypad to enter the current PIN.
2.
. Tap to end the ring tone.
.
drop-down list. This selection determines the tone
Keypad:
or to specify the duration of the sound when you press a
Long tones
tab (Figure 7-11), select the
tab (Figure 7-11), tap
Change PIN
105
drop-down list. To hear a sample of
Ring tone:
.
Require PIN when phone is used
tab.
Phone
.
GSM Configuration
.
check box under