Removing The Screen Protector; Replacing The Main Battery - Motorola FR68 Series User Manual

Removing the Screen Protector

A screen protector is applied to the FR68 Series. Motorola recommends using this to minimize wear
and tear. Screen protectors enhance the usability and durability of touch screen displays.
To remove the screen protector, lift the corner using a thin plastic card, such as a credit card, then
carefully lift it off the display.
Figure 1-6
CAUTION
NOTE

Replacing the Main Battery

1.
Open the battery door latch on the battery door.
2.
Please wait for 5 seconds after the display is off.
3.
Lift the top of the battery door and remove.
4.
Press the battery release latch on the top of the battery to unlock, and lift the battery out of the
well.
5.
Insert the replacement battery, bottom first, into the battery compartment in the back of the FR68
Series.
6.
Press the battery down into the battery compartment until the battery release latch snaps into
place.
NOTE
7.
With the battery door latch open, insert the door, bottom first, then press down on the top of the
door (The latch will lock the door automatically when the door is installed properly).
The FR68 Series powers up after the battery is inserted and the battery door is replaced.
Removing the Screen Protector
Do not use a sharp object to remove the protector. Doing so can damage the display.
Not using a screen protector can affect warranty coverage. To purchase replacement protectors,
contact your local account manager or Motorola, Inc. These include screen protector installation
MN2800AAAPSC
instructions. Part number:
Position the battery correctly, with the battery charging contacts on top of the charging contacts in
the battery compartment.
.
22
Getting Started