Table of Contents
Advertisement
SAFETY INFORMATION
Continued
13. Avoid the use of an extension cord because
the extension cord may overheat and cause
a risk of fire. However, if you have to use an
extension cord, the cord should be No. 14
AWG minimum size and rated not less than
1875 WATTS.
14. Always use properly grounded fused and
polarized outlets.
15. Always use ground fault protection where
required by electrical codes.
16. Always disconnect power before performing
any cleaning, maintenance or relocation of
heater.
17. To prevent a possible fire, do not burn wood
or other materials in this heater.
18 To prevent electric shock or fire, always use
a certified electrician should new circuits or
outlets be required.
19. When transporting or storing heater, keep in
a dry place free from excessive vibration and
store as to avoid damage.
LISTING APPROVALS
This heater has been tested in accordance with the
CSA Standards for fixed and location-dedicated
electric room heaters in the United States. All
components are UL or CSA safety certified.
If you need assistance during installation, please con-
tact your local dealer or the DESA Heating Products
Technical Services Department at 1-866-672-6040.
Description:
Voltage/Hz:
Watts:
Amps:
Note: This heater must be electrically wired and
grounded in accordance with local codes or, in
the absence of local codes, with National Electric
Code ANSI/NFPA 70-latest edition or the Cana-
dian Electric Code, CSA C2.1 as appropriate.
119719-01A
1" Fireplace/Insert
10/60
1500
15 Amp
Grounded Circuit
www.desatech.com
PRODUCT DIMENSION
SPECIFICATIONS
Note: Recommended clearance for ease of
installation is approximately 1" from edge of
unit to edge of mantel front.
Figure 1 - Heater Dimensions
20
/
"
1
2
17
/
"
1
2
3
Advertisement
Table of Contents
