Installation And Setup; Direct Or Shared Network Connection - Aastra 6731i Installation Manual

Installation and Setup

The 6731i IP Phone can be setup to share a network connection with
another network device. Power can be provided by the power adapter (sold
separately), or by an 802.3af compliant network power source, or with a
PoE inline power injector (optional accessory). If your System
Administrator has already setup your phone, please refer to the
Aastra 6731i User Guide for call handling information or contact your
System Administrator.

Direct or Shared Network Connection

The phone can be set up as a direct network connection to the Ethernet
wall jack or as a shared network connection as a pass-through if connecting
the phone to a computer or another network device.
Direct Network Connection
Located at the top of the phone are two fully switched 10/100 BaseT
Ethernet cable ports. The port marked with
phone to the network, as well as provide power to your phone (if required).
See "Connecting to the Network and to Power"
information.
Network Jack
(if Inline power provided,
do not install the power adapter)
Separate
Network
Jack
Other Network Devices
8 Model 6731i IP Phone Installation Guide
Ethernet
Cable
LAN
is used to connect the
on page 10 for more
Power Adapter
Connection
To Network
Power
Adapter