Introduction; Phone Features; Requirements - Aastra 6731i Installation Manual

Hide thumbs Also See for 6731i:
Table of Contents

Advertisement

Introduction

Congratulations on your purchase of the Model 6731i IP Phone! The 6731i
communicates over an IP Network, allowing you to receive and place calls
in the same manner as a regular business telephone. The 6731i IP Phone is
capable of supporting the SIP protocol.

Phone Features

• 3-line LCD screen
• 8 programmable top keys (4 Pre-configured functions: Save, Delete,
Directory , Services)
• Press-and-hold speeddial key configuration feature
• Supports up to 6 call lines with LEDs
• Full-duplex speakerphone for handsfree calls
• Built-in two-port, 10/100 BaseT Ethernet ports - lets you share a network
connection with your computer
• Inline power support (based on IEEE 802.3af Power-over-Ethernet stan-
dard) which eliminates power adapters.
• Headset mode support (via handset jack)
• AC power adapter (sold separately)
• Enhanced busy lamp fields*
• Set paging*
*Availability of feature dependant on your phone system or service provider.

Requirements

• SIP-based IP PBX system or network installed and running with a SIP
account created for the 6731i phone.
• Access to a Trivial File Transfer Protocol (TFTP), File Transfer Protocol
(FTP), Hypertext Transfer Protocol (HTTP) server, or Hyper Text Trans-
fer Protocol over Secure Sockets Layer (SSL) (HTTPS).
• Ethernet/Fast Ethernet LAN (10/100 BaseT)
• Category 5/5e straight through cabling
• Power source
For Ethernet networks that supply in-line power to the phone (IEEE
802.3af):
— For power, use the Ethernet cable (supplied) to connect from the
phone directly to the network for power. (No 48v AC power
adapter required if using Power-over-Ethernet.)
For Ethernet networks that DO NOT supply power to the phone:
— For power, use the 48V AC Power Adapter (limited power source
(LPS) power supply, Input rated 100-240Vac. 50-60Hz, 0.6A.
Output rated 48Vdc, 0.31A min, included only in specific Aastra
ordering SKUs) to connect from the DC power port on the phone
to a power source.
or
Model 6731i IP Phone Installation Guide 1

Advertisement

Table of Contents
loading

Table of Contents