GARDTEC 590/591
Setting The System
This section is for systems fitted with LCD keypads for
LED keypads please refer to page 13
1)
With the display showing:-
2)
Enter the User code (followed by YES if
Master or Main type code has been used).
The display will show:-
and a continuous exit tone will sound
3)
Exit the premises via the authorised exit
route (the exit tone will change if any detectors
are violated during exit)
4)
Once the premises are secure listen that the exit
tone returns to the continuous tone.
5)
Wait until the exit tone finishes before leaving.
Unsetting The System
1)
Enter the premises via the authorised entry route
(the broken entry tone will sound),
proceed to the keypad.
2)
At the keypad enter a valid code, the display
will show:-
3)
The system is now unset.
Page
3
User Manual
< < < < UN-SET > > > >
01 JAN 18 : 58 : 01
EXIT Now !
All Zones ON
15
< < < < UN-SET > > > >
01 JAN 18 : 58 : 01