User Initiating Remote Access - GARDINER TECHNOLOGY GARDTEC 590 User Instructions

GARDTEC 590/591
9) If you wish to program other User codes return to step 4
Or
To return to the Unset condition press 0
Programming Date & Time
Note: When using LED keypads the Date & time will only be displayed when the 3
key is pressed whilst viewing the Log.
With the display showing U N enter a Master code
1)
The display will show S E
2)
Press NO six times, the display will show D t (flashing).
3)
Press YES, the display will show D - enter the day and month followed by
4)
YES (e.g 0706 for 7th June).
The display will show t - enter the time using the 24Hr clock followed by
5)
YES (e.g 2330 for 11:30pm).
The display will show D t (flashing).
6)
7) If you wish to re-program the time return to step 4
Or
To return to the Unset condition press 0

User Initiating Remote Access

Users should only initiate Remote Access when instructed to do so by the installation
company.
With the display showing U N enter a master level code then press NO
1)
seven times the display will flash A r.
Press YES the display will show W X (Wait) then D I (Dialling) then
2)
( N (Connected).
When the installation company has finished the display will return to U N
3)
Page
19
User Manual