Unsetting The System; Part Setting The System - GARDINER TECHNOLOGY GARDTEC 590 User Instructions

GARDTEC 800 Series

Unsetting The System

1) Enter the premises via the authorised entry route (the broken entry tone will
sound).
Proceed to the keypad, enter a valid user code, the display will show U N
2)
3) The system is now Unset.

Part Setting The System

(using Master & Main type codes)
With the display showing U N Enter a Master or Main type code
1)
The display will show S E (flashing). Press 1, 2 or 3 (for Part 1, 2 or 3) the
2)
display will show the E and:-
The two bottom bars if Part 1 has been selected
The top and bottom bars if Part 2 has been selected
The bottom bar only if Part 3 has been selected.
3) The exit tone may or may not be heard dependant on the system settings.
4) Exit the premises or retire to an unprotected part of the system. At the end
of the exit time either the exit tone will stop or a single beep will be emitted
(dependant on system settings).
Page
14
GARDTEC 590/591