Changing The Chime Status - GARDINER TECHNOLOGY GARDTEC 590 User Instructions

User Manual

Changing The Chime Status

(Master code only)
The Chime zones will have previously been programmed by the installation company.
A Master level code may change the status of the Chime between On and Off. To do
so proceed as follows:-
1) With the display showing:-
2) Enter a Master Code, the display will
show for example:-
3) Press NO four times, the display will show:-
4) Press YES the display will show for example:-
Or:-
5) Press NO to change the status of the Chime,
then press YES, the display will show:-
6) Press 0 to escape, the display will show:-
Page
8
GARDTEC 590/591
< < < < UN-SET > > > >
01 JAN 18 : 58 : 01
Do you want to . .
Set . ?
Do you want to . .
Change Chime ?
Chime is Off ok ?
Chime is On ok ?
Do you want to . .
Change Chime ?
< < < < UN-SET > > > >
01 JAN 18 : 58 : 01