Testing The System - GARDINER TECHNOLOGY GARDTEC 590 User Instructions

User Manual

Testing The System

(Master & Main codes only)
With the display showing U N
1)
Enter a Master or Main level code, the display will show S E (flashing).
2)
Press NO twice, the display will show t E (flashing).
3)
Press YES, the display will show t A press YES if you wish to test all areas
4)
(or press NO until the area you wish to test is displayed then press YES)
The display will show t E (if all zones are clear).
5)
6) Whilst in test mode:-
Pressing 6 will silence the internal sounders
Pressing 4 will toggle the strobe On / Off
Pressing 9 will toggle the Bells On / Off
7) When you have finished testing the system press 0 twice to return to the
Unset condition.
Page
16
GARDTEC 590/591