Changing The Chime Status; Programming User Codes - GARDINER TECHNOLOGY GARDTEC 590 User Instructions

User Manual

Changing The Chime Status

(Master code only)
The Chime zones will have previously been programmed by your installation company.
A Master level code may change the status of the chime between On and Off. To do
so proceed as follows:-
With the display showing U N enter a Master code
1)
The display will show S E (flashing)
2)
Press NO four times the display will show ( H
3)
Press YES, the display will show O F or O N
4)
5) Press NO to change the Chime status.
6) When you have finished press 0 twice to return to the Unset condition.

Programming User Codes

(Master code only)
Please refer to pages 2 & 34 for details of codes already programmed onto your
system.
With the display showing U C enter a Master code
1)
The display will show S E
2)
Press NO five times, the display will show U C (flashing).
3)
Press YES, the display will show U -
4)
5) Enter the User number you wish to program (1 to 7 for 800 followed by YES
The display will show ( O Enter the required code (4, 5 or 6 digits) followed
6)
by YES. (Entering 000000 will delete an existing code).
The display will show t - enter the code type from the following list followed
7)
by YES:-
Code Types may be seen at the beginning of this manual.
Page
18
GARDTEC 590/591