Programming User Codes - GARDINER TECHNOLOGY GARDTEC 590 User Instructions

GARDTEC 590/591

Programming User Codes

(Master code only)
1) With the display showing:-
2) Enter a Master Code, the display will show:-
(User Names on 816 & 840 Only)
3) Press NO five times, the display will show:-
4) Press YES, the display will show:-
(1 - 7) displayed on 800 & 816
5) Enter the user number (1 to 7) that you
wish to program followed by YES, the
display will show:-
6) Enter the code you require (codes may be 4,
5 or 6 digits) followed by YES.
(Entering 000000 will delete an existing code)
Note: If the code already exists or is a duress of
another code an error will be shown,
choose another code and return to step 6
7) The display will show:-
(not if user 1 is being programmed).
The display will scroll showing the code
types available (see user types or display).
8) Enter the required type followed by YES,
the display will show:-
9) If you wish to program other User Codes
return to step 4
Or
Press 0 to return to:-
Page
9
User Manual
< < < < UN-SET > > > >
01 JAN 18 : 58 : 01
Do you want to . .
Set ?
Do you want to . .
Prog. USER CODES ?
Enter User No. - -
(1- 7) Then YES
Now Enter Code . .
- - - - - - Then YES
Choose Type . . -
0 = xxxxxx 1 = xxxxxx
Do you want to . .
Prog. USER CODES ?
< < < < UN-SET > > > >
01 JAN 18 : 58 : 01