Controls And Indicators; On/Alarm Silence/Manual Battery Test Button - Liebert 2700VA User Manual

CONTROLS AND INDICATORS

ON/Alarm Silence/Manual Battery Test Button

This button controls output power to connected load(s) and has
three functions:
• ON
• Alarm Silence
• Manual Battery Test
ON - Pressing this button will start up the UPS in order to provide condi-
tioned and protected power.
Alarm Silence - To silence alarms, press this button for at least one sec-
ond. After the alarm is silenced, the UPStation GXT 2U will reactivate the
alarm system to alert of additional problems.
NOTE
The LOW BATTERY and BYPASS reminder alarms
CANNOT be silenced.
Manual Battery Test - To initiate a manual battery test, press the ON but-
ton for at least one second while operating from utility power with no
alarm conditions present.
• If only three of the five Battery LEDs illuminate, allow the UPS to
recharge the batteries for 24 hours.
• After 24 hours, retest the batteries.
• After the batteries have been retested, if only three of the five Battery
LEDs illuminate, contact your local dealer, Liebert representative or
Liebert Worldwide Support Group.
All LEDs illuminated
for illustrative purposes only.
14