General Information; Identification Numbers; Ignition Switch Key; Control Locations And Functions - Arctic Cat 550 H1 EFI Manual

GENERAL INFORMATION

IDENTIFICATION
NUMBERS
The Arctic Cat ATV has two identifica-
tion numbers: Vehicle Identification
Number (VIN) and Engine Serial Num-
ber (ESN).
The VIN is located on the frame support
rail.
The ESN is located on the left-side rear
of the engine crankcase.
These numbers are required by the
dealer to complete warranty claims
properly. No warranty will be allowed
by Arctic Cat if the VIN or ESN is
removed or mutilated in any way.
Always provide the ATV name, Vehicle
Identification Number, and Engine
Serial Number when contacting an
authorized Arctic Cat ATV dealer for
parts, service, accessories, or warranty.
If a complete engine must be replaced,
ask the dealer to notify Arctic Cat for
correct registration information.
36

IGNITION SWITCH KEY

Two keys come with the ATV. Keep the
spare key in a safe place. An identifying
number is stamped on each key. Use this
number when ordering a replacement
key. Two keys are provided for the
steering lock.
CONTROL LOCATIONS
AND FUNCTIONS
Ignition Switch
AF968B
The ignition switch has three positions.
CF109I
OFF position — All electrical circuits
except the accessory plug are off. The
engine will not start. The key can be
removed in this position.
„ NOTE: The accessory plug is
powered by the battery at all times.
ON position — The ignition circuit is
complete and the engine can run. The
key cannot be removed in this position.
LIGHTS position — The ignition cir-
cuit is complete and the headlights and
taillights are on. The key cannot be
removed in this position.
ATV-0055
ATV-0056