Lcd Display And Indicators; Input Source Selection; Audio And Video Input Explanations - YBA DESIGN Pre-2DSP Owner's Information

Preamp-processor

Hide thumbs

Table Of Contents

Table of Contents

Auto Decode Mode (Auto detect input stream type)

When Pre-2dsp turned on, it automatically detects and differentiates the audio signal coming from

source unit.

Playing DVD, DVD Audio, CD, LD, TUNER, SAT, VCR and Games with analog outputs connected to

the analog inputs (A1, A2, A3, A4,& TAPE) of Pre-2DSP , the display shows the following information.

Playing DVD title with

Playing DVD title with DTS format, the display shows the following information.

Dolby Digital (AC-3)

The Pre-2dsp can be connected up to 8(A1~A4,D1~D4,V1~V4,S1~S4,C1~C2) audio & video

sources.

Select the input source feeding to Pre-2dsp by repeatedly pressing the Input/Select (+.-) Button

on the remote control until the desire setting is reached.

In the Digital Mode (Dolby Digital AC-3 / DTS), end user can manually select the audio input

source either in coaxial(D1~D3) or optical(D4) form depending on the type of the output source.

Input

+ +

_ _

Select

AUDIO AND VIDEO INPUT EXPLANATIONS

The A1 5.1 analog connector is used for the connection with decoder having 5.1 channels

analog output or DVD player. This input signal does not go through DSP processing, but will

directly go through by volume control and sent out 5.1 Audio output and synchronized with video

input control to DVD V1 and S1.

A2 analog audio input and output I/O connector corresponds to synchronous control video input

Video, V2, and S1.

A3 analog audio input and output connector corresponds to synchronous video input V3 and S3.

A4 analog audio input and output connector is to be used together with REC output connector

and mainly used for VCR or other equipment with sound recording function whose REC can only

record A2 or A3 analog signals. This connector also corresponds to video input connectors V4

and S4. V4 REC can record V1, V2, and V3 video input signals. S4 REC can record S1, S2, and S3

video input signals.

TAPE (PLAY, REC) analog audio record/play input connector set can be used to record and

monitor analog audio A2, A3, and A4.

D1, D2, and D3 are digital audio coaxial input connectors. These three connectors correspond

to video input DVD, VIDEO, and V1, V2, V3, S1, S2, and S3.

D4 is digital optical audio input connector and corresponds to synchronous video input V4 and

S4.

Pre-2DSP is equipped with COMPONENT connector DVD, VIDEO, and S connectors S1

normal video connectors V1 V4.

Video signal with best quality is COMPONENT connector the next S connector and COMPOSITE

connectors.