Front Panel Lighting Mode; Front Panel Lighting Mode (Hds4.2 Version) - Zektor CVS4 User Manual

CVS4 Command Reference (Cont'd)
Where:
in = Currently selected channel.
Note 1: If the CVS4 is off, this command will turn on power before selecting channel.
Note 2: For backward compatibility with the HDS4.2, there is no space after the command in the
response string.
Note 3: For backward compatibility with the HDS4.2, this response string is sent in the Asyn-
chronous mode when a channel status has changed. Future products will return the "Output
Mapping" Query Response string.

Front Panel Lighting Mode

Set the behavior mode of the front panel LEDs.
LM 0
LM 1
LM 2
LM 3
LM ?
LM
Response String:
=LM m
Where:
m = Current Lamp Mode setting

Front Panel Lighting Mode (HDS4.2 Version)

Note: This command exists for backwards compatibility with the HDS4.2, use the "LM" version of
this command in new designs.
Set the behavior mode of the front panel LEDs.
L 0
L 1
L 2
L 3
L ?
L
Turn off front panel lights.
Set the front panel lights to always DIM.
Set the front panel lights to always BRIGHT.
Set the front panel lights to AUTODIM after 4 seconds.
Query for current setting.
Query for current setting.
Set the front panel lights to be always DIM.
Set the front panel lights to be always BRIGHT.
Set the front panel lights to AUTODIM after 4 seconds.
Turn off front panel lights.
Query for current setting.
Query for current setting.
CVS4 Component Video Switch 13