Output Mapping; Channel Select (Hds4.2 Version); Front Panel Lighting Mode; Front Panel Lighting Mode (Hds4.2 Version) - Zektor CVS4 User Manual Supplement

CVS4 Command Reference (Cont'd)
P +
Toggle power.
P ?
Query for current setting.
P
Query for current setting.
Response String:
=Pn
Where:
n = Current power status.
Note: For backward compatibility with the HDS4.2, there is no space after the command in the
response string.

Output Mapping

Maps the CVS4's output to a selected input.
O in
Set output to input 'in'.
O ?
Query for current setting.
O
Query for current setting.
Response String:
=O in
Where:
in = Current input being mapped to the CVS4's output.

Channel Select (HDS4.2 Version)

Note: This command exists for backwards compatibility with the HDS4.2, use the "Output Map-
ping" command in new designs.
Selects the current CVS4 channel.
C in
Select channel 'in' (See Note 1).
C ?
Query for current setting.
C
Query for current setting.
Response String:
=Cin
2 CVS4 Component Video Switch
CVS4 Command Reference (Cont'd)
Where:
in = Currently selected channel.
Note 1: If the CVS4 is off, this command will turn on power before selecting channel.
Note 2: For backward compatibility with the HDS4.2, there is no space after the command in the
response string.
Note 3: For backward compatibility with the HDS4.2, this response string is sent in the Asyn-
chronous mode when a channel status has changed. Future products will return the "Output
Mapping" Query Response string.

Front Panel Lighting Mode

Set the behavior mode of the front panel LEDs.
LM 0
Turn off front panel lights.
LM 1
Set the front panel lights to always DIM.
LM 2
Set the front panel lights to always BRIGHT.
LM 3
Set the front panel lights to AUTODIM after 4 seconds.
LM ?
Query for current setting.
LM
Query for current setting.
Response String:
=LM m
Where:
m = Current Lamp Mode setting

Front Panel Lighting Mode (HDS4.2 Version)

Note: This command exists for backwards compatibility with the HDS4.2, use the "LM" version of
this command in new designs.
Set the behavior mode of the front panel LEDs.
L 0
Set the front panel lights to be always DIM.
L 1
Set the front panel lights to be always BRIGHT.
L 2
Set the front panel lights to AUTODIM after 4 seconds.
L 3
Turn off front panel lights.
L ?
Query for current setting.
L
Query for current setting.
CVS4 Component Video Switch