Front Panel Light Intensities; Front Panel Light Intensities (Hds4.2 Version) - Zektor CVS4 User Manual

CVS4 Command Reference (Cont'd)
Response String:
=Lm
Where:
m = Current Lamp Mode setting.
Note: For backward compatibility with the HDS4.2, there is no space after the command in the
response string.

Front Panel Light Intensities

Set the dim and bright levels of the front panel LEDs. The 'dim' level is the intensity of the front
panel LEDs when the DIM level is selected using the "LM 1" command.
The 'bright' level is the intensity of the front panel LEDs when the BRIGHT level is selected using
the "LM 2" command.
When "LM 3" is selected, the front panel will dim from 'bright' to 'dim' after about four seconds
of inactivity.
LI dim,bright
LI dim
LI ,bright
LI ?
LI
Response String:
=LI dim,bright
Where:
dim = Current DIM level setting.
bright = Current BRIGHT level settings.
The intensities range from 0=Off, to 44=Maximum brightness.

Front Panel Light Intensities (HDS4.2 Version)

Note: This command exists for backwards compatibility with the HDS4.2, use the "LI" version of
this command in new designs.
14 CVS4 Component Video Switch
Set the DIM and BRIGHT levels to 'dim' and 'bright'.
Set only the DIM level to 'dim'.
Set only the BRIGHT level to 'bright'.
Query for current settings.
Query for current settings.