Remote Controls; Remote Control Feedback (Rem2); Arming & Disarming With Stayd; To Turn On/Off Stayd Mode - Paradox Magellan MG5000 User Manual

Hide thumbs Also See for Magellan MG5000:
Table of Contents

Advertisement

Remote Controls

Your security system supports three types of remote controls; the REM1, REM2, REM3 and REM15. The REM1
and REM15 are the most basic remote controls, with the ability to perform five actions (e.g. arming, disarming,
activating a PGM, etc.). The REM2 is more advanced, as it performs up to six different actions, as well as pro-
vides visual and auditory feedback (see table below). The REM3 is the most advanced remote control, as it has
all the functionalities of a keypad (refer to the REM3 User Manual for more information). The following table
describes the visual and auditory feedback of the REM2 remote control.
NOTE: A wireless expansion module is necessary in order to use remote controls if you are using a Spectra SP
system. Please refer to your installer for more information regarding the use of remote controls with a Spectra
SP system.

Remote Control Feedback (REM2)

Full/Force Arming Feedback
Action
Visual Feedback
Disarming
Green on
Exit delay
Red / green slow flash
Arming / Entry Delay Red on
Alarm
Red fast flash
Stay/Sleep Arming Feedback
Action
Visual Feedback
Disarming
Green on
Exit delay
Yellow / green slow flash
Arming / Entry Delay Yellow on
Alarm
Red fast flash
Other Feedback
Action
Visual Feedback
PGM on/off
Yellow on
Arming & Disarming with StayD
StayD simplifies your life and makes it safer by protecting you 24 hours a day, 7 days a week without ever hav-
ing to disarm the system – even when entering an armed area. StayD lives with you and protects you at all
times, without any unprotected periods, and automatically re-arms the system so you don't need to remember
to.
When entering/exiting a site, the system partly disarms to let you pass through: simply notify the system with
your remote and go through the designated path which will automatically re-arm after you pass. All other zones
remain armed. The result is a system that is always protecting, without the uncertainty of whether the system is
armed or not.
Other benefits of StayD include knowing when your kids are accessing potentially dangerous areas, such as the
balcony, pool or front door. Now you can truly have peace of mind knowing that you are always protected. Con-
sult your installer for more information.

To Turn On/Off StayD Mode

To turn on StayD mode:
[S
] + [C
] + [S
TAY
ODE
TAY
Press the [
] key followed by a valid code, then press the [
STAY
light will light up to confirm StayD activation, and the system will be in Stay mode.
12
]  StayD light on
Auditory Feedback
Two beeps
Confirmation beep
Confirmation beep
Alarm beep
Auditory Feedback
Two beeps
Confirmation beep
Confirmation beep
Alarm beep
Auditory Feedback
Confirmation beep
] key again within ten seconds. The StayD
STAY
User Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents