Paradox Magellan MG5000 User Manual page 21

4 Using the [] / [
SLEEP
numbers you wish to program and press [
5 Enter the telephone number and press [
6 Select the which group of events will send a text message to the phone number set in step 5 (see Event
Call options below).
7 Press [ ].
ENTER
8 Select which partition(s) is assigned to this telephone number by pressing [1], [2], or both.
9 To save, press [
ENTER
Sample Text Messages
Alarm message
Sending Text Messages to Arm / Disarm
You can arm or disarm the system by sending a text message (SMS) from any cell phone. The message must
be sent to the GSM module's phone number, as determined by the cell phone provider (consult your installer for
more information). Text message commands have a specific format which follows this pattern:
C[ ].[ ].A[
USER CODE ACTION
NOTE: SMS commands must be entered in capital letters.
Example:C1234.ARM.A1.5555551234
C1234.OFF.A1.5555551234
In the example above, user code 1234 will arm or disarm partition 1, and the confirmation message will be sent
the following phone number: (555) 555-1234.
User Code
The first part of the text message is the user code (same code used on the alarm system). It must be prefaced
with the letter C and followed by a period.
Example:C1234.
Action
It is possible to arm or disarm the system. The command must be entered after the user code and followed by a
period. To arm the system, enter the ARM command. To disarm the system, enter the OFF command.
Example:C1234.ARM.
Magellan / Spectra SP
] and [] / [ ] keys or by entering [01] to [08], select one of the eight telephone
STAY
ENTER
].
Event Call Options
Option Events that send a text message
[1] Any alarm (e.g. fire, burglary etc.)
[2] Arming and disarming
[3] Any trouble (e.g. battery loss)
[4] Any trouble restore (e.g. battery restored)
Arming / disarming
message
].[
PARTITIONS PHONE NUMBER
].
ENTER
].
Trouble message
]
Trouble restore
message
19