Keypad Backlight; Power Save Mode (K32Rf / K37 Only) - Paradox Magellan MG5000 User Manual

Keypad Backlight

The illumination level behind the keys can be modified to suit your needs.
How do I modify the backlight?
• For K32, K32+ and K32RF: Press and hold the [ ] key. Press the [ ] key to set the desired backlight level.
Press [ ] or [
CLEAR
For K35: Press and hold the [] key for 4 seconds. Keys 1, 2, 3, 5 and 6 will flash. Press [
the menu without saving the information or press [
the desired key and scroll using the [] and [] to adjust:
[1] To adjust the scrolling speed.
[2] To adjust the backlight (0 = Off, 1 = Lowest brightness / 7 = Maximum brightness)
[3] To adjust the contrast (0 = Low contrast, 4 = High contrast)
[5] To adjust the auto dim backlight level (0 = Off, 1 = Lowest auto dim backlight, (...) 7 = Highest auto dim
backlight
[6] To adjust the auto dim delay (0 = Off, 1 = 1 sec., 2 = 5 sec., 3 = 10 sec., 4 = 20 sec., 5 = 1 min., 6 = 2
min., 7 = 4 min.)
For K37: Press and hold the [] key for 4 seconds. Keys 1 and 2 will flash. Press [
without saving the information or press [
desired key and scroll using the [] and [] to adjust:
[1] To adjust the backlight.
[2] To adjust the auto dim delay (5 = 5 sec. / 15 = 15 sec.)
For the K10V, K10H and K636: Press and hold the [
[ ] key to set the desired backlight level. Press [
MEM
For the K32LCD, K32LCD+: Press and hold the [ ] key. Press [2] to modify the backlight. Scroll using the
[] and [] keys. Press [

Power Save Mode (K32RF / K37 only)

If DC power is not supplied to the wireless keypad, the module's display will shut off and go into power save
mode after one minute (20 seconds for K37). Press the [ ] key to activate the display.
8
] to exit.
ENTER
ENTER
] to save.
ENTER
] to exit the menu and save the information. Press
ENTER
] to exit the menu and save the information. Press the
] key. The [
MEM MEM
] or [ ] to exit.
CLEAR ENTER
CLEAR
] to exit the menu
CLEAR
] key will illuminate. Press the
] to exit
User Guide