Setting The Time & Date; Setting Chime Zones - Paradox Magellan MG5000 User Manual

Setting the Time & Date
How do I set the time & date?
1
Press the [ ] key.
2 Enter your [
MASTER CODE
3 Press [ ].
TBL
4 Press [5].
5 Enter time* in the [
6 Select time format. [1] = 24hr; [2] = AM; [3] = PM.
7 Enter the date in the [
*For SP4000 / SP65 systems, time must be entered in 24hr format. Omit step 6 (time format).

Setting Chime Zones

A chime-enabled zone will advise you every time it is opened by causing your keypad to beep. Each keypad
must be chimed separately.
How do I chime zones?
•
For K32, K32+ and K32RF: Press & hold the [ ] key. The Arm1, Arm2, Stay1, and Stay2 LEDs will flash.
Enter the zone number corresponding to the zones you want to chime. The corresponding LED will light up.
Press the key to exit.
[ ]
ENTER
•
For K35 and K37: Press & hold the [ ] key (K35) or [ ] key (K37). The word Chime will appear on the
screen. Enter the zone number corresponding to the zones you want to chime. The corresponding LED will
light up. Press the
active.
• For K10V, K10H and K636: Press & hold the zone key ([1] to [0(10)]). Accept beep = chime on.
• For K32LCD, K32LCD+: Press and hold the [ ] key. Press [1] to select which zone to chime or press [2] to
configure chime period. The chime period allows you to specify the time frame in which the zone will chime.
Enter the zone number corresponding to the zones you want to chime. Press the [
How do I disable chime zones?
• For K32, K32+,K32RF, K35, K37, K32LCD and K32LCD+: To disable chime zones, repeat this process
and enter the zone number to disable a chime zone, or press [
entering a zone number.
• For K10V, K10H and K636: Press & hold the zone key ([1] to [0(10)]). Fail beep = chime off.
NOTE: For a description of the confirmation and rejection beeps, see Keypad Feedback on page 7.
To identify your keypad, see page 9.
Magellan / Spectra SP
].
. ] format. If HH = 13 or more, skip to step 7.
HH MM
/ / ] format. You have now set the time & date. Press [
YYYY MM DD
key to exit. Note: K37 will only chime when powered by AC or when the display is
[ ]
ENTER
CLEAR
ENTER
] to disable all chime zones instead of
SLEEP
] to exit.
] key to exit.
5