Test Report - Paradox Magellan MG5000 User Manual

Assigning a REM3 Hand-Held 2-Way Remote Keypad to the Panel
Step Action
1
[ ] + [
MASTER CODE
2 [ ]
USER NUMBER
3 [ ]
CODE
4 [
CONFIRM CODE
5 [
LEARN REMOTE
6 [1] and/or [2] + [
Communicator
Step Action
1
[ ] + [
MASTER CODE
2 [ ]
MEM
3 [3] = Personal Phone #1
[4] = Personal Phone #2
[5] = Personal Phone #3
[6] = Personal Phone #4
[7] = Personal Phone #5
[8] = Pager #
4 [ #] + [
PHONE ENTER
5 [ ] + [
MESSAGE ENTER

Test Report

Step Action
1
[ ] + [
MASTER CODE
2 [ ]
MEM
3 [2]
Auto Arm
Step Action
1
[ ] + [
MASTER CODE
2 [ ]
BYP
3 [1] = Auto arm (partition 1)
[2] = Auto arm (partition 2)
4 [ : ]
HH MM
5 [1] = Regular arm
[2] = Sleep arm
[3] = Stay arm
Erase Lost Remote Control
Step Action
1
[ ] + [
MASTER CODE
2 [ ]
BYP
3 [3]
4 [ ] + [
ALL REMOTES
5 Press and hold [
(3sec)
Magellan / Spectra SP
Details
] The [ ] key will flash.
LED/Key on = programmed user
[
PARTITION MASTER CODE
2 digits: 01 to 32
Enter 4- or 6-digit code.
] Re-enter 4- or 6-digit code.
] Press and hold the Information key ([i]) on the designated remote.
] Assign the user to one or both partitions and press [
ENTER
users are assigned to partition 1. Goes to the next available user.
Details
] The [ ] key will flash.
] Enter phone # (up to 32 digits) and press [
or go to step 5 if [8] = Pager # was selected.
] Step 5 for Pager # only. Enter pager message and press [
Details
] The [ ] key will flash.
Press the [
Send a test report to the monitoring station.
Details
The [ ] key will flash.
]
Enter time using the 24 hour format (e.g. 18:00 for 6:00 pm).
Details
]
] Press a button on all remotes. Press [
ENTER
] Press and hold [
SLEEP
may also be used.
]
] key
MEM
] to erase all lost remotes.
SLEEP
]. By default
ENTER
]. Goes to next phone#,
ENTER
ENTER
]
ENTER
].
25