Wasp WPL25 User Manual page 15

WPL25/WHC25 User Manual
3. Feeds the media through the rear external label entrance chute. And place the paper, printing
side face up, through the media guides, media sensor and place the label leading edge onto
the platen roller.
Rear external
label entrance
4. Close the top cover gently.
5. Use "Diagnostic Tool" to set the media sensor type and calibrate the selected sensor. (Start
the "Diagnostic tool"  Select the "Printer Configuration" tab  Click the "Calibrate Sensor"
button)
Note: Please calibrate the gap/black mark sensor when changing media.
11