Table of Contents
Advertisement
User Manual of Network Camera
Appendix 2 Port Map
Note:
The following setting is about TP-LINK router (TL-R410), which is maybe distinct
from other router's setting.
1. Firstly, select the router's WAN connection Type. As the following Fig. shows:
2. Set the "network parameter" of the router as the below figure. The setting
includes subnet mask and gateway.
3. Set the port map in the virtual severs of Forwarding. By default, camera uses port
80, 8000, 554 and 8200. You can change these ports value with IE or client
software.
The following figure gives the illustration. One camera's ports are 80, 8000, 554, 8200
and its IP address is 192.168.1.23. The other camera's ports are 81, 8001, 555, 8201
and IP is 192.168.1.24. Afterwards, enable all or TCP protocols. Enable the port map
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
35
Advertisement
Table of Contents
