Table of Contents
Advertisement
User Manual of Network Camera
right. Click "modify" button to activate IP address, subnet mask, device port
editing and password validating box, as follows:
Select the device that needs modification in the device list, then basic
information of the device will be demonstrated in the information column on the
right. Click "modify" button to activate IP address, subnet mask, device port
editing and password validating box, as following:
Input new IP address, subnet mask, and port number, and click "save" button. If
a dialog pops up, showing "saved successfully", that means you have modified
the configuration information; if "saving failed" turns up, click the "cancel"
button to quit it.
4. Recover default password
You can reset the password of the super user as "12345" in the case of a lost
password.
Input certain validation code into the 'Resume default password' box, and click
'OK' to finish the administrator's password initiating.
Note:
Password reset code can be obtained by the technicians from Hikvision
after you provide the device Serial NO.
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
34
Advertisement
Table of Contents
