HIKVISION DS-2CD7153 User Manual page 21

User Manual of Network Camera
Alarm
ParametersAlarm Input
Setting:
Set the type of Relay
Status to NC or NO.
The Linkage method can
be selected to E-mail link
or Trigger alarm output.
Alarm OutputAlarm
Output Setting:
The Output Delay refers to
the length of time that the
relay remains in effect
after alarm occurs. The
output delay time can be
set to 5sec, 10sec, 30sec,
1min, 2min, 5min, 10min or
Manual (manually
disable).
Alarm Deployment Time:
The Deployment time can
be set to a day of the
week or to all week, with a
period configurable
each day.
Note: The
deployment time setting is
valid only when
camera has already been
configured with the motion
detection, alarm input and
alarm output functions.
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
Fig. 2.1.23 Alarm Output Delay Settings
for
alarm
the
Fig. 2.1.24 Alarm Deployment Time Settings
Fig. 2.1.22 Alarm Input Settings
15