Table of Contents
Advertisement
User Manual of Network Camera
Remote Upgrade:
Click Browse to select
the local update file
and then click Upgrade
to
finish
remote
upgrade.
Restore Default:
Select Full Mode or Basic
Mode
to
restore
default settings.
Note:
The Full Mode refers to
restore all parameters to
the
factory
default
settings.
The Basic Mode refers to
restore the parameters to
factory
default
settings
except IP address, subnet
mask, gateway and port.
Reboot Device:
Click OK to reboot the
network camera.
2.1.2.3 Advanced Configuration
Note:
This chapter is applicable to professional configuration.
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
the
Fig. 2.1.28 Remote Upgrade
Fig. 2.1.29 Restore Default
Fig. 2.1.29 Reboot Device
17
Advertisement
Table of Contents
