HIKVISION DS-2CD7153 User Manual page 20

User Manual of Network Camera
Network
ParametersDDNS
Setting:
Click the checkbox of
Enable NTP to enable this
function. Input the Server
Address and Port of NTP.
If the public network is
applied, please input the
NTP Server Address with
provision of time
service,
210.72.145.44.
In the private network is
applied, the NTP software
can be used to establish
NTP server to achieve time
synchronization.
Network
ParametersE-mail
Setting:
Through E-mail settings, the
alarm message can be
sent to the designated
E-mail address when alarm
event occurs.
Input the SMTP server, SMTP
port, user name, password,
E-mail sender and receiver,
and finally click Save to
finish E-mail settings.
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
sync
e.g.,
Fig.2.1.20 NTP Settings
Fig. 2.1.21 E-mail Settings
14