Rinnai ENERGYSAVER EX08C Installation Fundamentals page 31

Furnace Packaging and All Hardware
Ensure correct gas type is on package!
All hardware needed for *standard
installation is included in package with
furnace.
*Included with furnace:
• Installation and owner's manual
• Wall termination that will fit wall thickness of 4.5"-9.5"
• Wall mounting back spacers
• Mounting screws
• Vent locking clamps
• Wall mounting template included
• ½" Jo-Mar shut-off gas valve
• Packing board to place under unit if installed on carpet
(unit must be installed on an approved surface)
* Extension venting, vent covering, and nonstandard wall
terminations are available separately
NOTE: Do not discard or cut into box—
the wall template for termination is now
on the back side of the cardboard.
31