Sirius Range Hoods SUF1 Installation Instructions Manual page 2

Under cabinet range hoods
Hide thumbs Also See for SUF1:
Table of Contents

Advertisement

at
Thank you for purchasing a Sirius Range Hood.
Please read all the instructions in this manual
Save these instructions for future reference.
Only use this appliance as an exhaust ventilation system for the removal
of cooking vapors. DO NOT use to expel flammable substances or any
other materials or vapors.
The installation procedures in this manual are intended for qualified
installers,
background. DO NOT attempt to install this appliance yourself.
Ensure that electrical power is turned off at source before commencing
installation. All electrical wiring must be properly installed, insulated and
grounded and conform to all applicable codes and standards.
Make sure all existing duct work is clean of grease build up, or duct work
should be replaced, if necessary, to avoid the possibility of a grease fire.
Check all joints on ductwork to ensure proper connection and all joints
should be properly taped. Be careful when cutting through ceilings or
walls not to damage any hidden pipes or electrical wiring. Ensure your
kitchen has sufficient air return vents to replace the exhausted air.
Fan ducts should always be vented to the outside of your home and never
into spaces within walls, ceilings, lofts or attics. Only use rigid, smooth
steel for ducting. The exhaust point of the blower requires a 6" round
connection.
Call 1-800-667-8721 anywhere in the US and Canada
W A R N I N G
before installing the appliance.
service
technicians
or
kitchen::
Sirius at
U
N
L
I
persons
with
similar
qualified
accessories
M
I
T
E
D
www.kitchensource.com
-

Advertisement

Table of Contents
loading

Table of Contents